;; Step 1: Create a selection set (setq ss (ssget '((0 . "LWPOLYLINE,CIRCLE,ELLIPSE,SPLINE,REGION,HATCH"))))
(setq acres (/ total 43560.0)) (princ (strcat "\n>>> TOTAL AREA: " (rtos acres 2 2) " ACRES <<<")) This version shows your total in Square Meters and Square Feet simultaneously:
Do you have a specific requirement for your total area Lisp (e.g., export to CSV, subtract voids, or add prefixes)? Write a comment below or modify the code as shown in Part 4 – the power of open-source Lisp is that it is infinitely customizable. total area autocad lisp
: This works, but it requires a 12-step wizard, creates an Excel table, and is overkill for a quick sum.
| Error Message | Cause | Solution | | :--- | :--- | :--- | | | You selected lines, arcs, or blocks. | Convert lines/arcs into a single Polyline ( PEDIT command). Explode blocks first. | | "; error: no function definition: VLAX-GET-AREA" | The Visual LISP extension is not loaded. | Type (vl-load-com) in the command line and press Enter, then retry TOTAREA . | | Area = 0.00 | The polyline is self-intersecting or not closed. | Check the polyline property Closed = Yes . Use OVERKILL to clean up geometry. | | Command: TOTAREA Unknown | The Lisp is not loaded correctly. | Re-run APPLOAD and ensure the file path is correct. Type (C:TOTAREA) manually. | | Area is astronomically large | Your drawing units are in millimeters (1 unit = 1mm). | Divide total by 1,000,000 to get Sq. Meters. Or modify the Lisp to (/ total 1000000) . | Part 7: Why Choose Lisp Over Native Tools or Plugins? You might ask, "Doesn't AutoCAD 2025 have a built-in Total Area tool?" ;; Step 1: Create a selection set (setq ss (ssget '((0
: The Lisp routine above costs $0. It runs instantly, doesn't require an internet connection, and works on any version of AutoCAD from R14 to 2026.
(princ (strcat "\n>>> TOTAL AREA: " (rtos total 2 2) " SQ. FT. <<<")) Conversion: 1 Acre = 43,560 square feet : This works, but it requires a 12-step
(setq sq_meters total) (setq sq_feet (* total 10.7639)) (princ (strcat "\n>>> TOTAL: " (rtos sq_meters 2 2) " Sq. M. | " (rtos sq_feet 2 2) " Sq. Ft. <<<")) If you need more than just a simple sum, consider these variations: 1. The "List Total Area" Lisp (TOTAREATEXT) This routine not only calculates the total but also writes it into the drawing as a MTEXT object.