| | ACI 318-14 | ACI 318-19 (per PCA Notes) | | --- | --- | --- | | High-Strength Reinforcement | Limited to Grade 80 (80 ksi) | Grade 100 (100 ksi) allowed with modifications | | Shear Strength (Chapter 22) | Simplified method based on √f’c | New size-effect factor for beams without stirrups | | Two-Way Shear (punching) | Vc based on √f’c * b0 * d | Vc now includes a size effect factor (λ_s) that reduces strength for thicker slabs | | Dowel Bars for Wall-to-Slab | Required to ensure composite action | Clarified detailing for non-composite walls | | Development Length (Chapter 25) | Simplified equation (ld = 0.17ψt ψe db fy / √f’c) | Modified to account for epoxy-coated bars more precisely | | Anchorage (Chapter 17) | Based on Appendix D (2011) | Full integration – new provisions for adhesive anchors under sustained tension |
The PCA Notes is not the ACI Code. It is a companion . You cannot design with the Notes alone; you must have a copy of ACI 318-19 at your side. However, the Notes will teach you how to correctly interpret and apply that code. Part 2: The Massive Shift – ACI 318-11 to ACI 318-14/19 To appreciate the PCA Notes on ACI 318-19, you must understand the structural revolution of 2014. Before ACI 318-14, the code was a single, linear narrative (Chapters 1-22). You had to read everything to design anything. pca notes on aci 31819
In the world of structural concrete engineering, two documents dominate the landscape. The first is the ACI 318-19: Building Code Requirements for Structural Concrete – the legal benchmark for safe design. The second, often sitting right beside it on every senior engineer’s desk, is the "PCA Notes on ACI 318-19." | | ACI 318-14 | ACI 318-19 (per
This article provides a deep dive into the PCA Notes on ACI 318-19, exploring its structure, its critical updates from previous editions (notably ACI 318-14 and 318-11), how to use it in parallel with the code, and why it remains indispensable for the EIT, the SE, and the plan reviewer. The PCA Notes originated from a simple, frustrating reality: the ACI 318 code is written as a legal document, not a textbook. It tells you what to do (e.g., "The nominal shear strength shall not exceed...") but rarely explains why or shows you how step-by-step. However, the Notes will teach you how to
One of the most noteworthy changes in ACI 318-19 (and thus heavily annotated in the PCA Notes) is the . For decades, punching shear capacity did not penalize thicker slabs, even though tests showed a reduction. The 2019 code introduces a factor λ_s = min(0.5 + d/20, 1.0) for slabs thicker than 10 inches. The PCA Notes provides worked comparisons: a 24" thick mat foundation loses ~25% of its nominal shear capacity under the new rules. Part 5: How to Use the PCA Notes Alongside ACI 318-19 (Workflow) The most common mistake is reading the PCA Notes instead of the code. Here is the correct workflow for a typical design task: