Write operation freezes at 99%. Solution: This is a known v31 bug regarding the partition's G.P.T. (GUID Partition Table). Use a hex editor to zero out the last 512 bytes of your dump file and rewrite.
Remember to always back up the full eMMC (including boot partitions) before writing anything. In the world of NAND programming, the difference between "patched" and "bricked" is often just a single unchecked box. Disclaimer: This article is for educational and informational purposes only. The author does not condone software piracy or copyright infringement. Always check your local laws regarding the circumvention of technical protection measures. mk emmc plus v31 patched
| Feature | MK eMMC Plus v31 Patched | EasyJTAG Plus | Medusa Pro II | Raspberry Pi (RPI eMMC) | | :--- | :--- | :--- | :--- | :--- | | | $50 - $80 (used/patched) | $400+ | $600+ | $35 (plus adapter) | | ISP Speed | 80 MHz (Patched) | 100 MHz | 50 MHz | 25 MHz (via SDIO) | | RPMB Bypass | Yes (Patched) | Yes (Paid license) | No | No | | User Friendly | Medium | High | High | Low (Command line) | | Support for eMMC 5.1 | Partial (via patch) | Full | Full | Partial | Write operation freezes at 99%
Click "Identify." The patched software will display the full CID, CSD, and EXT_CSD registers, even for non-standard chips (e.g., old Hynix or Micron chips with bad blocks). Use a hex editor to zero out the