For the SOP-8 version, pins 5-8 are typically connected to a heatsink pad or left NC. Always verify with the specific manufacturer’s datasheet. 3. Absolute Maximum Ratings Exceeding any of the following ratings will likely destroy the IC. This table is based on typical Highway 09 specifications.
Operating near maximum ratings reduces lifetime. Provide adequate heatsinking if I_OUT > 500mA. 4. Electrical Characteristics Typical values at VIN = 12V, I_OUT = 500mA, T_A = 25°C, unless otherwise noted. highway 09 ic datasheet
| IC Part | Input Max | Current | Dropout | Key Difference | |---------|-----------|---------|---------|----------------| | | 40V | 1.5A | 300mV | Good balance; rugged | | LM7805 | 35V | 1.0A | 2V | Older, higher dropout | | LM317 | 40V | 1.5A | 1.7V | Adjustable only | | LT1086 | 30V | 1.5A | 1.3V | Lower dropout but costly | For the SOP-8 version, pins 5-8 are typically
For further reading, look for application notes on "Automotive Power Supply Design Using Linear Regulators" or "Thermal Calculations for LDOs." Disclaimer: Specifications provided are aggregated from typical datasheets. Actual parameters may vary by manufacturer. Always validate with the official component datasheet before production. Absolute Maximum Ratings Exceeding any of the following
A: No. The pinout is different. The 7805 has Input-Ground-Output, while the Highway 09 (TO-220) has Input-Ground-Output but note that the tab is also ground. Always check.